RX-50

Managed Display Controller

The RX-50 provides display controls for TVs that have an integrated tuner and therefor do not need an additional tuner/decoder set top box. Compatible with the MX-400, MX-100 and MX-GS200 display control protocol, the RX-50 controls the display state using only the coax wiring. This plug-and-play device is easily registered with the WPE MX product by momentarily connecting the RX-50 USB port to the MX headend equipment. Installation requires no further configuration as the RX-50 will automatically discover the appropriate control channel and from that point on is software controlled. The display state can be set using CEC on the TVs HDMI port, RS-232, IR, or via a power relay using the internal GPIO controls. Device controls are script driven using positive feedback to ensure the correct state is reached. Use this device to control a display, set top box, or any other appliance that is easily reached via in-house cable TV coax infrastructure.

Highlights

DTV Control Box

  • Control display power, channel, volume, and more.
  • Control over coax wire. No CAT5 or WiFi required.
  • All displays controlled from one UI on Mx products
  • Easy install with RF inline connections. RF input, RF output - to display
  • Easy registration with MX products via USB. Plug and play
  • RX connects to display via RS-232, IR, HDMI-CEC, and GPIO AC relay
  • USB powered
Hardware
  • Dimensions: 60 mm x 100 mm 15 mm
  • Inputs/Outputs:
  • USB device port for registration and power
  • RF input, connect to house RF
  • RF output, connect to TV
  • 2.5 mm jack - CIR emitter
  • 3.5 mm jack - RS-232 (RS-232 or TTL levels)
  • CEC - Utilize the TV's HDMI-CEC controls
  • Status LEDs:
    • Power, 4 bar signal strength, Signal Lock, Managed, and Fault
  • Tuner:
    • MHz boundaries, 47 - 1002 MHz VHF/UHF (ATSC, US CableTV)
  • Demodulation:
    • ATSC / US Cable TV
    • DVB-T/C
  • TV/Display controls:
    • Receives DTV control signals over coax wiring
    • Commercial TVs: DB-9 RS-232 5' cable and null modem adapter included
    • Consumer TVs: HDMI-CEC (power on/off only)
    • Other devices: Consumer IR emitter, GPIO relay